Looking for 12" wide for p650

Thanks for any help!

 

contact Keizer wheels, if they don't have what you want I believe they can make um! 712-737-3053 keizerwheels.com

 

You could also contact Douglas wheels directly. I know that they custom make 11" wide wheels to go with our 24" paddle tires we use on the V-Force.

 

P.W. ... I see you aced me on my wheel company...LOL... did you order a set of beadlock from them ???

SHOTGUN ... They have moved, I don't remember If I gave P.W. the new phone # or not... I'll check my e-mails, to see if this is current... why stick with the 12" wheels anyway, they can do a 15" O.D. wheel in your bolt pattern, up to 15" wide ... I was told that they expect to be able to do 16" O.D. wheels by spring / summer... this gets us into some interesting sizes of tires that would work great for pulling / mud bogging...

New Address and Phone

712-737-3053
712-737-3054
Fax 712-737-3055

Web Site...
http://www.keizerwheels.com/2003_web...ct_00000b.html


Keizer Aluminum Wheels Inc.
3981 Jackson Ave
Orange City, Iowa 51041

 

Guys, thanks for the infor...... my tires are 12" wide, I'd like to go to 13" wheels so they will run as flat on the ground as possible.

I have 13" wheels now but they are steel, want to lighten up some.

 

How much do these wheels cost. I am also interested in getting a flatter profile. If you get wheels custom made, how do you decide how much offset? I would not want the tires to rub.

 

i made my own out of two 5 in halfs and drilled mine own hole until we found Keizer Aluminum Wheels Inc.
there perfect and not to crazy on there prices.

 

Viol8tr

don't go any more offset on the inside of the wheel than stock, less is ok, but more will rub.

If a wheel was 7" wide and the offset of 2+5 means 2" offset from insideof rim and 5"offset from outside of rim.

 

SHOTGUN... was Keizer able to fix you up ??? I don't think Stockton wheel does aluminum wheels ( but I didn't actually talk to them ), but the do widen & make custom steel wheels... perhaps you could have an ultra light set of steels made, or they may do aluminum wheels, now that they have begun to sell an aluminum wheel... let me know if you can't find a way of contacting them, if interested...

 

Shotgun, do you have a schedule for your pulling events? I pulled my Kodiak in Dover last year when it was brand new and was suprised at the amount of people there....it was alot of fun but I wasen't set up very good. I had my 589's on the machine and it was to much tire for it...couldn't get my rev's up! so I only pulled it about 90 feet. I think I would like to try it again this summer with my stock tires and some weight and mabey a clutch kit to get the rev's up more....Thanks