Just got my jet kit # Q214.001-- stage 1 (V-Force) the jets are sized -DJ116 to DJ130 skipping odd# and a DJ134 and a DJ138. I don't think these are standard jet sizes, does anyone know how the sizes compare to Keihin #'s ? thanks...

 

look on nyrocs web there is a listing or cross reference chart there

 

Thanks Yunk, I'll look there. Couldn't seem to pull up the pdf on Dynojet site.

 

I'd be interested in hearing what you find out.

I always thought (never checked) the sizes were smaller because the Dynojet needles are usually a lot thinner and more tapered than stock allowing more gas to pass up the needle jet for a given jet size.

Mark

 

Don't know about needles yet but according to Nyroc dj 122 is k 130, dj124 is k132.5, dj126 is k135 dj128 is k137.5, dj130 is k140, dj132 is k142.5, dj134 is k145, dj136 is k147.5, dj138 is k150, dj140 is k152.5-- that's as far as it goes. Not sure but think needles may just have more adj. slots.

 

I hope that is the case, Mark. I just looked in the kit and DJ says use 124 f & 128r , which should be Keihin size 132.5 f & 137.5 r. Stock V is 135 f & 140 r . The DJ sizes are for sea level with pipe and stock air box w/ aftermarket filter. I plan on using a DG snorkle and possibly removing the baffle.--If I can't use this kit I will be pissed!-at 85 bucks instead of a few 5$ jets. I will be calling Dynojet Thurs am.........: