What is the maintenance we have to do on the drive clutch? I have 6000 kil on my P 650 and I clean the clutch every 800 kil with air . Do I have to put some grease somewhere on the bushing or any place else ? It start to have some loose on these bushing. . After removing the clutch from the bike what is the best way to separate those two parts? do we have to heat them? I did't find any of these information on Nyroc's site

C O N C O U R S

 

The only place grease is used is on the secondary clutch where the two sheaves slide over each other. You must be talking about taking the primary clutch apart - no heat!! The spider unscrews from the rest of the assembly using special tools.