tightening drive chain on mojave
#1
#2
tightening drive chain on mojave
... Sure thing. Tightening the chain involves loosening the 2 bolts at the end of the swingarm- behind the carrier, they are probably 14mm. this will allow the axle carrier to rotate freely, the carrier is oval shaped which causes the assembly to move further or closer to the quads center. After you have the desired tension, retighten the swingarm end bolts and go riding.
P.S. this is best donw with the rear of the quad raised so as to facilitate easier rotation of the axle carrier. Hope this helps ya...........
P.S. this is best donw with the rear of the quad raised so as to facilitate easier rotation of the axle carrier. Hope this helps ya...........
Thread
Thread Starter
Forum
Replies
Last Post
joeyupton
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
07-14-2015 11:51 AM
Mojave250A
Performance Mods and Project Quads
1
07-11-2015 10:38 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)