Im thinking about getting new cams.I want cams that are going to improve mid to top end power,any suggestions?If so how much will the cams cost and what else will I have to change to get these cams to work? will i have to go with different valve springs and a bigger carb etc.

 

powroll makes cams,ya have to make sure that the cams dont have too much lift because if they do ya can hit the piston cause big buck damge,some pistons have fly cut reliefs if using stock ya have to cut the piston for clearance,bigger carb and valves equal more flow so do headers and pipes,a stroker crank will give ya more hp and going to more ccs will give ya more torque and hp

 

powroll makes cams,ya have to make sure that the cams dont have too much lift because if they do ya can hit the piston cause big buck damge,some pistons have fly cut reliefs if using stock ya have to cut the piston for clearance,bigger carb and valves equal more flow so do headers and pipes,a stroker crank will give ya more hp and going to more ccs will give ya more torque and hp