I just installed a box on my BF and was wondering if it needed to be jetted or anything else before i run the machine..

and also a question on ticking noise when it gets warm the bike only has 13 hrs could this be a valve? it gets worse when is accelrated.

 

CDi box is plug and play, no need to re-jet but it might help get a little more out of the machine. Don't know about the ticking, my engine doesn't make any sounds like that. I have heard of several Brutes having an exhaust leak up where the header pipe meets the exhaust manifold, might want to check that. If you take it back to the dealer, put your old CDI box back in first, the Dyna CDI box voids your engine warranty.

 

If you notice a miss/surge about 1/8th throttle you may want to have the dealer put the updated needle in the front carb, the ticking may be a slightly loose valve clearance, mine has a slight tick, I think as the motor gets more miles on it they should tighten up, if it gets worse have the valve clearance checked at about 500 miles.........

 

well its not and exhaust leak and its got worse def in the case in the front somewhere the dealer will get it back tomorrow and i already put back in factory cdi..