DG5 installation instructions?
#1
DG5 installation instructions?
Just got a DG5 and need some mounting/installation instructions for the Brute Force 750. Can anyone help me out?
TIA
rgrego1@aol.com
TIA
rgrego1@aol.com
#2
DG5 installation instructions?
Visit
http://atv.dnsalias.com/ http://kod.gotdns.com/
or contact DG
TuffEnuff[img]i/expressions/face-icon-small-cool.gif[/img]
http://atv.dnsalias.com/ http://kod.gotdns.com/
or contact DG
TuffEnuff[img]i/expressions/face-icon-small-cool.gif[/img]
#3
DG5 installation instructions?
Try this:
1. as you look at your wiring harnesses (3) on the left hand harness locate the yellow with a red stripe on it. Tap into it with the DG5 red wire.
2. On the right hand harness locate the black with a yellow stripe wire and tap into it with the DG5 black wire.
3. In the center harness locate the pink wire. Cut it so that you have 2 ends. on the end going to the harness connect the DG5 green wire. On the other end going to the CDI connect the DG5 blue wire.
These instructions are for the Brute Force or Prairie that uses the 3 plug CDI. That should do it and you will be good to go. Good luck.
1. as you look at your wiring harnesses (3) on the left hand harness locate the yellow with a red stripe on it. Tap into it with the DG5 red wire.
2. On the right hand harness locate the black with a yellow stripe wire and tap into it with the DG5 black wire.
3. In the center harness locate the pink wire. Cut it so that you have 2 ends. on the end going to the harness connect the DG5 green wire. On the other end going to the CDI connect the DG5 blue wire.
These instructions are for the Brute Force or Prairie that uses the 3 plug CDI. That should do it and you will be good to go. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
jrooker6
Polaris
18
04-23-2016 07:36 PM
750, brute, dg5, dg5instal, force, forum, highlifter, install, installation, instructions, kenwood, wire, wiring
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)