I have a 05 Prairie 360 and the light keeps flashing. I shut it off and its fine for about 10 minutes and flashes again. The flashing is real slow. Whats going on? Please I need some help. Thanks.

Noble

 

Visit http://atv.dnsalias.com and select tech Tips, But first check your battery for proper voltage/dead cells, and adjust your belt deflection if loose. One thing sure to remember is not to EVER, EVER turn on your key with your CVT/belt cover cover off.[img]i/expressions/face-icon-small-cool.gif[/img][img]i/expressions/face-icon-small-frown.gif[/img][img]i/expressions/face-icon-small-confused.gif[/img]

 

Tuff, couldn't get the site to open??

Noble

 

Just type in atv.dnsalias.com in your browzer & go; leave off the http. May have to be a member or have a log in to read tech tips, forget, but membership is free

 

Here's the Link I't very likely could be your belt actulator, might be out of position, read up on Nyroc's site should help ya out

 

I went there and had to sign in. I didn't see how to sign in????

Noble

 

Not to sure if the 360 will be the same as the 750, but this is what the BF 750 manual states.
1/2 second intervals - bad engine braking actuator.
1 second intervals - 4wd actuator is bad
2 second intervals - both actuators are bad.
As I said, I am not sure they are the same set up. Hope this helps.