KFX 400 Spindle Shaft
#1
KFX 400 Spindle Shaft
Hey people what's up?
I'm obviously new to these boards, so i outta introduce myself before requesting help from you ATV Gurus. My names JP, and I ride a 04 KFX400. Pretty much stock, other than the Nerfs and skidplates, and tires. My problem is this.
I hit a tree goin 50mph. It sucked, big time. Fortonetly, there was minimal damage to the KFX, where that the left wheel took most of the impact. I had to repace the rim, and my rotar is tweaked a slight bit, which i will have surfaced, but I am baffeled as to how I replace the obviously out-of-wack spindle shaft. I have ordered the new parts, but I can't figure out how to get the old one from out the spindle. Any ideas? Should I just bang on it with a hammer?
I'm obviously new to these boards, so i outta introduce myself before requesting help from you ATV Gurus. My names JP, and I ride a 04 KFX400. Pretty much stock, other than the Nerfs and skidplates, and tires. My problem is this.
I hit a tree goin 50mph. It sucked, big time. Fortonetly, there was minimal damage to the KFX, where that the left wheel took most of the impact. I had to repace the rim, and my rotar is tweaked a slight bit, which i will have surfaced, but I am baffeled as to how I replace the obviously out-of-wack spindle shaft. I have ordered the new parts, but I can't figure out how to get the old one from out the spindle. Any ideas? Should I just bang on it with a hammer?
#2
KFX 400 Spindle Shaft
When I crashed my KFX I did the same thing. The spindle bent. I went to my local atv shop an ordered a whole new knuckle for like $150.00 or something around there, later to find out i could have just bought the spindle for $65.00. If you buy the spindle at lonestar racing www.lsracing.com i think you will need to get it machined in an if yours is already bent just hammer it out cuz theres no saving it.
hope that helps.
hope that helps.
#5
#7
KFX 400 Spindle Shaft
Ahh. Well I work at a machine shop, and we have an arbor press that may work. Anyway, I just put my new rims on yesterday without the spindel and it doesnt wobbloe at all. I came across one major problem though, my frame is bent all to hell [img]i/expressions/face-icon-small-sad.gif[/img] It appears as though the A-Arm took the impact, and transfered it right into the frame, pushing it in on itself. Sucks. But it still rides smooth.
Thread
Thread Starter
Forum
Replies
Last Post
Chasso
2) Chassis problems..
1
09-19-2015 03:06 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)