Getting KFX700 Dyno'd
 

I just put a Muzzy exhaust on my KFX700 and now I'm dropping it of for our local performance shop to fine tune the jetting on the Dyno. Before they do the Dyno there going to install the Twin Air Power Kit (will tune with the lid off) and a rev box.

They did do a Dyno run with the lid on and the new pipe and they said the jetting looked lean (157.5, 155). Top speed was 63mph.

Looking forward to the results.....Probably next week sometime

Getting KFX700 Dyno'd
 

how only 63mph? i woulda thought a 700 would be faster than 63

Getting KFX700 Dyno'd
 

Hmmm,,,63..looks like u need to bring them jets size up to 185,,open that air box up,,,and take out that primary spring,,and put in a ,,comet black,,,or ,,one that u like,,Hope u like your Muzzy,,,i like mine,,,good luck,,

Getting KFX700 Dyno'd
 

Current airbox set up had 3 EPI vent holes and DG Snorkel. They did say I was running lean, but we stopped the testing to order a better filter since I was going to run with the lid off. They didn't like how the stock filter was seating at the base and it was separating at the top. Ordered the twin air kit and also a rev box. The spring that is in there is the pink spring.

Looking forward to the results.

Getting KFX700 Dyno'd
 

Thats too slow...almost funny.

Getting KFX700 Dyno'd
 

We need to talk. [img]i/expressions/face-icon-small-smile.gif[/img]

I have been looking for a place to get my V on a dyno, to see if I can tune any more power into it and try some exhaust stuff on it. I think I have your number from the e-mail you sent me (If that was you?). I might call you next week some time (If that is OK?) and get the info for the place that you are getting dyno work done at.

I'm shooting you a PM.

Getting KFX700 Dyno'd
 

RPM......I was the one who emailed you about your swing arm. Feel free to give me a call about the Dyno....I don't know where you are located in WA or what your schedule is, but I can let you know what day they are going to do the Dyno and you can come check them out. The shop is located in Puyallup on River RD.

I would also like to here what you have done to your engine/carbs. Always looking to go faster

Cell: 253.312.5546
email: arrowbucket@comcast.net

Getting KFX700 Dyno'd
 

Is it S&S Motorsports?

I will call you about it.

Getting KFX700 Dyno'd
 

Yes it is...

Getting KFX700 Dyno'd
 

63, no way.

I have my time sheets from a local racetrack, with laser timing saying that my speed was 69 in the 1/8th mile. STOCK.