I had less than 300 miles on my Dunflops when a rock took out the side wall and left me with a three wheeler for a 30 mile ride back to town!

Mouser: I had the low speed miss too, but the Dynojet kit took care of that. I also installed the Copperhead VDI which has made an incredible motor even that much better.

 

1 year, 3280 miles! Gee, what do you do, deliver pizzas on this thing! LOL

 

ive got well over 3,000 miles on my dunflops and no problems besides a total lack of traction and terriible handling. If i put some alltraks or atrs should it clean up the handling issues.

 

You must not ride anything rocky and stay on railroad beds or something. The terrain I ride is a mix of all of those and my treads are about half of what they were. And this is after only 1100 miles.

 

Ok, this is your first quad and still have stock tires. I'll have to let you know that when you buy tires, you will agree it is the single best upgrade you will do. I have had many machines, and when I decided to get aftermarket tires, I didn't look back. I can't go more than a few hundred miles before buying tires since. This is especially on the kawasaki machines.
The only machine made with somewhat decent tires is the Polaris's.

I think you have done quite well putting miles on your 650. My 650 only has 950 miles, but I have 112 miles and 10 hours on my BF750 in just a few weeks.

 

LOL no not pizza..........its 20 miles to the beer store by trail ,lol

 

LOL, they are definitely useful for those sort of runs too!

 

Bubba i got the oild cooler and all the hardware off of ebay, The oil coolers is about 14x8 inches and the adapter that goes between the filter and engine works real well. I Also installed a small fan in front of the radiator that i can control via toggle switch for them slow,tight trails. I will try and get some pics on here soon.
Bubba if you do a search on here of my post i got the oil cooler adapter from another forum member and there more info on there. IF you need any more help,info PM
thanks
Bill