Hard Shifting - 2001 Bayou 300
Aug 27, 2007 | 10:45 AM
#1
Thread Starter
|
Trailblazer
Joined: Jul 2007
Posts: 62
Likes: 0
Hard Shifting - 2001 Bayou 300
I recently bought a 2001 Bayou 300 2x4. While it starts and runs fine, it is hard to shift into higher gears, frequently requiring two or more lifts with my foot. Any ideas or suggestions? Thanks, Jim
Aug 27, 2007 | 05:03 PM
#2
Pro Rider
Joined: Oct 2001
Posts: 1,743
Likes: 0
Hard Shifting - 2001 Bayou 300
Check/adjust:
1). Clucth adjustment screw (under the black cover on the right side).
2). Detet spring (stretch it)
3). Shift shaft for burrs or bending.
Also, try to shift when RPM is about to come down as you close the throttle. Don't try to shift while accelerating (throttle open). Meaning that you should not open the throttle while shifting.
1). Clucth adjustment screw (under the black cover on the right side).
2). Detet spring (stretch it)
3). Shift shaft for burrs or bending.
Also, try to shift when RPM is about to come down as you close the throttle. Don't try to shift while accelerating (throttle open). Meaning that you should not open the throttle while shifting.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)