hello can somebody tell me how to change the belt on the 750 brute force

 

Remove the main center bolt that holding the drive converter onto the crankshaft end. Slide out the converter from the crank. Remove the belt and place a new one in. I've seen a guy (a really strong dude) removing the belt without taking the converter off from the crank with BARE hands - slowly rotating counterclockwise.
You rellay need a service manual if you want to do it right and avoid the frustration.

 

I take my belt off with out getting the clutch puller toll. Just get a 27mm wrench and use it to help role the belt off then back on.

 

thanks but i got it off by hand i removed the centre bolt but could not get the clutch off the crank do you need a puller for this

 

Yes, you can either buy a puller or make your own to slide the converter off the crank which is tapered - very tight fit.