I was thinking of buying the Dynatech chip but one concern I have is overriding the rev limiter. Is any concerned about revving to high and blowing it up? Sometime when riding with friends we tend to go wide open and i dont want an expensive repair!!
Thanks
Also is the Dynatech the best one??

 

We have one in our 700 Prairie and I love it. It helps out the bottom end of the start. You shouldn't blow it up. The only thing is in the rocks it can get a little snappy if you don't pay attention.

 

Great Thanks
What about the belt indicator? How will i know if the belt has a problem?

Thanks

 

If it goes into Limp mode you will know it with a Dyna or No Dyna.
Just check your Belt every 100 hrs & the Belt lite will NOT come on @ 100 hrs with the Dyna.
The overide is mainly while in reverse as the Dyna will overide the reverse limiter.
For the Dollar, the Dyna is tuff to beat & can be had off of Ebay at a low Price.

 

bfb750BF is right its hard to beat the Dynatec, i bought his moose one used and it was awesome but it only is from 0-7 MPH and the dynatec is all through the power range the take offs are hang on or else, the first launch I did w/ the Moose one pulled the front wheels off the ground 3 feet, my brother inlaw said my eyes were as big as silver dollars. I had never launched the Prairie 700 so hard, I put the dynatecs in our bikes and you reall cannot go wrong for the $$$