fixed belt lite butt....
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
03 prairie 4x4 will not go fast after belt lite reset. will go in 4x4 but lite does not come on, 4x4 works. i power washed and cleaned atv to sell all of a sudden its sputtering and backfiring. need help
i took the cover off the belt should the switch be in the on or off position ?
i took the cover off the belt should the switch be in the on or off position ?
#2
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
What size Prairie? Did you do all this stuff?
http://www.rattlebars.com/prairie/belt.html
Switch goes to the ON position for running.
http://www.rattlebars.com/prairie/belt.html
Switch goes to the ON position for running.
#3
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I did. it is running fine now. i set the idle up on the carb, let it run for 10 min on 1/2 choke, took choke off lowered idle slightly and took off like its supposed to. one small backfire when i slowed down. im gonna drain gas and put new gas in.
can i put an additive in for the carb like in a vehicle ? thanx for the response.
mike
can i put an additive in for the carb like in a vehicle ? thanx for the response.
mike
#5
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I will give Sea Foam a second vote. It is a great product and does everything that it claims to. I used it in one of my bikes that was so gummed up that the only way it would run was with full choke. After about 1 gallon of gas with Sea Foam, it ran well enough to go on a ride. I now use it with every tankful.
Thread
Thread Starter
Forum
Replies
Last Post
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
09-09-2015 09:38 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)