1997 Lakota 300 Questions and jetting ?
#1
1997 Lakota 300 Questions and jetting ?
I have a 1997 Lakota 300 2x4 Been a good machine, Few questions I bought a DG pipe for it and wonder what jet size change should be expected? Also what are any good mods for this machine? It's not a rocket but I always like to improve what I have Thanks
#2
130 main dynojet jet , if you aren't in the mountains, and the dyno needle+KN..
OR
get a ninja 600 carb rail (less than 50 bucks on ebay) and a UNI air filter -- and a 13 or 14 tooth front gear ..
in MY opinion, that's IT...
and if you want more, get RZR steel wheels, and some 25" grizzly 660/600 dunlop tires ...
OR
get a ninja 600 carb rail (less than 50 bucks on ebay) and a UNI air filter -- and a 13 or 14 tooth front gear ..
in MY opinion, that's IT...
and if you want more, get RZR steel wheels, and some 25" grizzly 660/600 dunlop tires ...
#3
btw, i only have FIVE lakotas .. and this is the mods I prefer..
replace carb hat and needle with ninja stuff, UNI air filter,... and wheels and tires .. about $250 a bike .. i HAVE done the big bore+head+hicompresison++++++++ trust me, you get 50-70% of the improvements for less than 300 bucks
replace carb hat and needle with ninja stuff, UNI air filter,... and wheels and tires .. about $250 a bike .. i HAVE done the big bore+head+hicompresison++++++++ trust me, you get 50-70% of the improvements for less than 300 bucks
#4
#5
130 main dynojet jet , if you aren't in the mountains, and the dyno needle+KN..
OR
get a ninja 600 carb rail (less than 50 bucks on ebay) and a UNI air filter -- and a 13 or 14 tooth front gear ..
in MY opinion, that's IT...
and if you want more, get RZR steel wheels, and some 25" grizzly 660/600 dunlop tires ...
OR
get a ninja 600 carb rail (less than 50 bucks on ebay) and a UNI air filter -- and a 13 or 14 tooth front gear ..
in MY opinion, that's IT...
and if you want more, get RZR steel wheels, and some 25" grizzly 660/600 dunlop tires ...
Thread
Thread Starter
Forum
Replies
Last Post
tank10rnk
General Chat
2
08-10-2015 08:19 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)