my brute force is cutting out when i put it in a mudhole i have 28x9.5x12 outlaw mst on the front and 28x12x12 on the back and i know it has enough power to pull those tires but i have no earthly idea why it would be cutting out in a mudhole it doesnt go dead but it just cuts out a lose of power and i cant figure out what it is anybody got any answers to what might be causing this

 

Is it sucking steam through intake?

 

Im not sure if it is what would that do to the bike if it was doing that

 

Getting water in your CVT cover?

Those size tires won't make a difference......the Brute has plenty of power to pull them through anything.

 

When you hit the mudhole the water splashing on the motor will make steam and it will suck into your carbs and make it spit and sput and sometimes stall.

 

Check vent lines that are hanging down below the frame[under engine] !if they are cut them off shorter or re-route them. this is common,sometimes sticks and stuff can grab them and pull them down making them hang lower than they surpose to... this will make carb not to vent and could cause resricted fuel for an moment..Good Luck...