how wide should the drive belt be mine is 1 1/8" the bike doesn't want to go when u hit the gas has to rev up before it starts to move. pulled the cover off lots of dust but belt looks ok unless its just to thin

 

ok belt should be 1.187" so it must be a clutch problem any help would be appreciated

 

You don't measure the width on CVT belt. You measure the total deflection amount while exerting the specified amount of force using the force gauge per instruction on the manual. If you don't have the required special tools or manual, you ain't gonna get it right. Your next bet is to try a new belt.