Kawasaki Discussions about Kawasaki ATVs.

300 kawasaki bayou lost fire

Thread Tools
 
Search this Thread
 
Old Mar 10, 2013 | 07:40 PM
  #1  
ray27's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2013
Posts: 9
Likes: 0
Default 300 kawasaki bayou lost fire

hello new to the group.
I recently started working on a 1987 kawasaki bayou 300 2x4 it was laid up for the past several years i dug it out and got to work on it it had no fire to begin but with another power pack got it back in no time, i then went thro the bike cleaned crab changed oil and few other things and had the bike running great starting every touch of the button. until i had it running the other day and went to change out battery the bike sputtered for a few seconds and died, since then the netural light in the dash will not come on and has no fire, even when the bike had power pack gone the netural light was comming on, would it be possible i blew something else by unhooking the battery?
 
Reply
Old Mar 10, 2013 | 10:32 PM
  #2  
papa hogg scoot's Avatar
Pro Rider
Liked
Loved
Community Favorite
Joined: Jun 2010
Posts: 1,709
Likes: 30
From: Notheast Alabama
Default

explain no fire? do you mean spark or no electical fire?
 
Reply
Old Mar 11, 2013 | 05:44 AM
  #3  
bvolks's Avatar
Range Rover
Joined: Jan 2012
Posts: 175
Likes: 0
Default

If it was me I'd clean my cable connections at the battery and check for a ground wire you might have damaged or missed when you were messing with the battery.
 
Reply
Old Mar 11, 2013 | 02:09 PM
  #4  
ray27's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2013
Posts: 9
Likes: 0
Default

By no fire I mean no spark
 
Reply
Old Mar 11, 2013 | 02:27 PM
  #5  
ray27's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2013
Posts: 9
Likes: 0
Default

Yes I have checked and cleaned all connections around battery, is there any other fuses other then the main one one the positive battery cable that might control that neutral light a guy once told me that if that light didn't come on there would be no spark
 
Reply
Old Mar 11, 2013 | 05:37 PM
  #6  
ray27's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2013
Posts: 9
Likes: 0
Default

I was just out working at in again checking everything over and came to find that while spinning the bike over and slightly turning the key to the off position right before the key goes into the off position i get one spark in between the on and off positions. which isnt making sense to me.
 
Reply
Old Mar 12, 2013 | 08:30 PM
  #7  
96yamwarrior's Avatar
Trailblazer
Joined: Mar 2013
Posts: 31
Likes: 0
Default

Possibly a bad ignition switch then?
 
Reply
Old Mar 13, 2013 | 09:34 AM
  #8  
ray27's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2013
Posts: 9
Likes: 0
Default

already bypassed that and still same trouble
 
Reply
Old Mar 13, 2013 | 10:43 AM
  #9  
96yamwarrior's Avatar
Trailblazer
Joined: Mar 2013
Posts: 31
Likes: 0
Default

Ok did you check the electrical to see if the ohms were in speck such as stator pickup coils cdi etc.?
 
Reply
Old Mar 13, 2013 | 11:30 AM
  #10  
Hayashi's Avatar
Pro Rider
Joined: Oct 2001
Posts: 1,743
Likes: 0
Default

Is the green neutral light coming on now when gear is in neutral?
 
Reply



All times are GMT -5. The time now is 08:29 PM.