KFX400 Choke Cable Removal?
#1
KFX400 Choke Cable Removal?
Sup guys,
I have a 2006 KFX400 and the motor blew so I'm parting the bike out. I have someone interested in buying my carb and I got the whole thing off the bike except I cannot figure out how to remove this choke cable from the carb itself. I unscrewed the plastic bolt that is there but it is spring loaded and just spins back. I don't want to ruin the cable.. Is there a trick to this? I moved the boots covering the metal cable guide that allows it to free spin when I unscrew that bolt and I was able to get it to separate without damaging the cable. But now I can't get the part inside out.. Do I take a small screw driver and unscrew it to get the cable out?
I have a 2006 KFX400 and the motor blew so I'm parting the bike out. I have someone interested in buying my carb and I got the whole thing off the bike except I cannot figure out how to remove this choke cable from the carb itself. I unscrewed the plastic bolt that is there but it is spring loaded and just spins back. I don't want to ruin the cable.. Is there a trick to this? I moved the boots covering the metal cable guide that allows it to free spin when I unscrew that bolt and I was able to get it to separate without damaging the cable. But now I can't get the part inside out.. Do I take a small screw driver and unscrew it to get the cable out?
#2
If the brass plunger is frozen/corroded in the carb you might try some penetration oil such as PB Blaster and let it sit awhile. Plus on most carbs you can pull the top cap and diaphragm and can see the plunger end and if careful you can use a small pick to help pry it out. Kawasaki ATV Parts 2006 KSF400A6F KFX400 CARBURETOR Diagram
#3
Thread
Thread Starter
Forum
Replies
Last Post
house1
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
3
08-09-2015 10:49 PM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
07-29-2015 01:24 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)