1996 buyou 300 putting clutch in help
#1
1996 buyou 300 putting clutch in help
So I reinstalled my new clutches. I bought a new drum, centrifugal and friction plates.
It's slipping worse than it was before.
So I took it all apart inspected everything. It all looks good.
The secondary where the friction plates sit are they supposed to be loose? When everything is put together I can slip all the disks about quarter inch back and forth in the basket. Is that normal?
Thanks for the help
It's slipping worse than it was before.
So I took it all apart inspected everything. It all looks good.
The secondary where the friction plates sit are they supposed to be loose? When everything is put together I can slip all the disks about quarter inch back and forth in the basket. Is that normal?
Thanks for the help
Thread
Thread Starter
Forum
Replies
Last Post
Jugglethese
Drivetrain, Suspension & Tires
15
07-11-2016 10:21 AM
Boxertim
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
07-07-2016 08:06 AM
tweeder
Vintage Machines.. Pre 1975, Dirt bikes, ATV's, MiniBikes, Snowmobiles, etc....
0
06-22-2016 10:38 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)