P360 spring
#1
P360 spring
OK you 650 monsters....the little lady has a p360. From all of the entries I've seen here, one of the common threads is get the black spring for the clutch system (for the 650). I read where the red spring is more appropriate for the 360. Is this correct? If so....
question 1) where do you suggest I purchase this little item
2) how long should it take me to install...I'm pretty mechanically inclined and have plenty of tools
I thank you in advance for your help and coments.
Remember to respect the other riders....and we'll all have a BLAST! Thanks again[img]i/expressions/face-icon-small-smile.gif[/img]
question 1) where do you suggest I purchase this little item
2) how long should it take me to install...I'm pretty mechanically inclined and have plenty of tools
I thank you in advance for your help and coments.
Remember to respect the other riders....and we'll all have a BLAST! Thanks again[img]i/expressions/face-icon-small-smile.gif[/img]
#2
P360 spring
i had the same question a few days ago. grizzlytim said he contacted epi about the spring and they said the red spring was the best for the 360. go to www.erlandsonperformance.com they have the red and black springs there. i havent bought one yet so i dont know how long or hard it will be to install nyroc has the best tech tips on the instalation you can find him on some of the posts here
#3
P360 spring
im not positive, but pretty sure that the red secondary spring is the way to go. I got my black spring from EPI here is their site: http://www.erlandsonperformance.com/
the installation should be pretty much the same as the 650, very simple, make sure you have a decent pair of circlip pliers (we had a crappy pair and it took us awhile to get the circlip off)
the installation should be pretty much the same as the 650, very simple, make sure you have a decent pair of circlip pliers (we had a crappy pair and it took us awhile to get the circlip off)
#4
P360 spring
I installed the Black secondary on my 360, I think it gave it a little more low end, but not a bunch.. I contacted EPI after I installed the black spring & they recomened the red one. I have heard of guys installing the red on on the 360 & really liking it, so when I get done with finishing my basement, I'm going to give it a shot..
Also I have heard the stock 650 springs works well
Also I have heard the stock 650 springs works well
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)