Does anyone know how i can take the govorner off of it to make it go faster? If u do plz reply?
And any other ways to make if faster.

 

It's probably similar to our '02 Scramber 50 govenor... it's built into teh CDI and cannot be over riden. We used a CDI from an ETon to replace the Polaris CDI, and that took care of it.

Bryce

 

Did you take the washer out of the exhaust? You can get aftermarket CDIs, and a multitude of other parts to make that thing faster.

 

The only governors that I'm aware of on this bike are the little exhaust restrictor thats right on the end of the tailpipe and the throttle limiter screw.I hope thats all there is because my cousin has one and its as fast as our 04 E-ton Viper with just those two things removed! The exhaust restrictor really kills the power and slows it down nicely for little ones just learning.

 

we have an '03 sportsman 90 and their was a jumper on the cdi box. remove that and it went from 15 mph to 30 mph.

 

Where was the jumper inside?

 

The '03 have a stainless Steel jumper screwed onto the CDI box.. '02s don't.

Bryce

 

Dang it. Oh well hope to have his new Predator 90 this week so will just mess with it[img]i/expressions/face-icon-small-smile.gif[/img]

 

I recently bought a 2002 polaris scrambler 90 and was wondering how to take govenor off exhaust? Is it something i can do myself? Also where can i get a cdi box to make faster? Pls help....

 

No governor on the exhaust.Baffles get plugged up with oil and carbon build up over the years. You can try soaking the exhaust system in kerosene or do like I did (with owners permission) and a lot of other people have done and use a bent punch and drive through the end of the muffler through the baffle. Doesn't make it much louder but does allow a better exhaust flow. Cheaper than getting a new system.