1- When you change your exhaust pipe , do you change your sparkplug ?I see somebody changes the BPR7HS by a B8HS ?
2-If you put carbon reeds , do you change it more often ?
3- If you put a uni filter , is there no problem with the engine "life" ?
4- Do you change your rollers weight very often ?

 

dog wrote
Installing the new throttle cable is very simple. Get a hold of WRHracing.com . If memory serves me well the cable came with instructions. It only takes 15- 20 minutes and we are no mechanical wizards here either.

 

Mark ,
I think you know very good the Predator and I need your help.You speak about yellow torque spring and red shoe spring of Malossi .Do you have the "reference" of it ? It will be more easy for me to find it in France than buy it in USA.

 

tonnerre,

I noticed in your pictures section you say you are getting the 2005 predator 90...do you know of any changes Polaris will be making to the new year model????

TY in advance

 

Billy
are you here

 

No , i dont know what will be new on the Predator 2005.
I ear on other forums it will have a rear brake disc and a reverse mod . And you ??Do you have any photo ?

 

No, I don't have any pictures. I was hoping to find out some info on the 05 models. If I find anything i will post it on the site.


TY

 

i will get the malossi numbers for the springs tomorrow and post back.

Mark

 

For the rollers weight , I found in Malossi parts 5.4 gr , but no 5.5 gr like you ?
The number part is 66 9417 EO (diameter 15 mm , long 12 mm) Is it this one ?
For the clutch spring (the big one ),do you have a number part in Malossi parts ? or the diameter of the spring ?
how do you make for changing shoe springs in few minutes ? I need your help.
Franck

 

In my Hot Seat KIt , there is a different axle for the vario .More long.
Is it the same with the other one (hetrick , wrh , ...) ?