Shock question
#2
Shock question
.
If found the front shocks on our Pred-90 were too stiff from the factory as well. Installed 1.5" wheel spacers on the front and due to further out geomentry, the spring rates were suddenly perfect. As a suggestion, add 1.5" spacers on the front of your ATV. It will make the ATV "less tippy" in the corners or moments of improperly leaning and reduce the stiffness of the front shocks. Worked for us...
.
If found the front shocks on our Pred-90 were too stiff from the factory as well. Installed 1.5" wheel spacers on the front and due to further out geomentry, the spring rates were suddenly perfect. As a suggestion, add 1.5" spacers on the front of your ATV. It will make the ATV "less tippy" in the corners or moments of improperly leaning and reduce the stiffness of the front shocks. Worked for us...
.
#4
Shock question
Are the springs removable from the shocks?The only way that might work is if you could cut the springs and then stretch them back out to their original length and reinstall them.Just cutting the springs will not make them any softer and will just reduce the ride hieght of your atv....I would really look at getting some different shocks.Yours may have too much compression dampening regardless of the spring thats on them.
#5
Thread
Thread Starter
Forum
Replies
Last Post
1ArmBandit
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
55
10-14-2015 09:03 PM
TheATVSuperStore.com
TheATVSuperStore
0
09-09-2015 07:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)