I am going to be working on a 410 water cooled big bore when I assemble all the parts I need. It should scream pretty good.

 

A guy in PA has 9 of them for sale right now. Must have been rentals or something. Prices range from $1500 to $3600 on these.

 

Where did you hear about them? Are they all 85's?

 

There was a post on www.pilot-odyssey.com. The site is down as of this posting. The site owner has had to deal with a lot of ISP and enviro-**** hacker issues for the last several months. It is usually not down that long.

All FL350R's are 1985. It is the only year they were made. There are a few other boards. There is the Pilot-Odyssey backup board. There is usually only posts on that board when the main board is down. There is the one on Glamis Online. That was a popular Pilot and Odyssey board. We moved off it so the owner could focus on the American Sand Association and getting Glamis back. Another is Mike's Pilot board. I don't know the URL. It is run on EZBoard. EZBoard sells email addresses to junk mailers so I don't use that one.

 

I knew that all 350's were 85, what I meant by "Are they all 85's" is were they all 350's. I thought that there might have been some 250's cause I see alot of them for around $1500

 

Yeah, they are all 350s. I was thinking about picking up another parts machine. I have already used both axles, the tranny, the front trailing arms and a lot of other parts off my last one.

Here is real video of me taking out an axle and right side trailing arms. I was in first place and just about to lap the guy in last.

 

That link for the video isn't working.

 

Yeah, site is still down.

I'll have to copy some of the cool video and jump pics over to my own site. The site that my sig links to is currently hosted on the same server though [img]i/expressions/face-icon-small-sad.gif[/img].

 

Yeah, I tried your site to, which is also down.

 

Here's a decent deal deal. It says it needs engine work which usually means a stuck ring because the exhaust port bridge was not relieved.

You should be able to pull those links up now.