I recently got ac nerfbars for my 02 cannibal. they didn't come with any instructions and I don't see how they can fit! I know that the newer c-dales have rubber plug where the front part of the nerfbar goes into, but mine is solid. I went to my dealer and placed my nerfbar in a newer speed that had the rubber plug. The piece that would bolt to the foot peg is about 1" away. On top of that I would have to drill the holes in the nerfbars to bolt up to the frame. The only way I see to make the nerfbars work is to cut a hole into the frame and bend the nerfbar to fit. This just doesn't seem to work. Wanting to get some advice on what to do. Has anyone put ac nerfbars on their cannibal.

 

I just gat the AC on my Speed. You will need to drill out a hole where on some quads you remove the Plastic plug. They will than slide in and the bolt hole lines up to the upper frame rail hole. The spacer goes into the bolt hole on the frame and than bolt the Nerf, spacer, frame rail toghter. Don't tighten eveything up yet. Get some clamps and clamp the nerf to the footpeg and align them. Drill a hole though the nerfs into the footpeg and bolt them.

Your done.

Smitty