Ok,

This is the low down from Harry at Trinity Racing.

1. Polish and Port Head $350 you must also send the cams so that he can ensure that the valves are shimmed correctly. For the $350 you will get Intake Ported, Exhaust Port and Polished, Valves will be lapped. If you have a bad valve he will try to cut it, and if not in spec you need to pay for a new valve. Ti any one?

2. If you want a Stage 4 exhaust - Complete system only they are $499.00 and include a Remap. If you want one you need to call and get on the list, he can't keep them in stock.

3. My Head was the first one Harry did so he in excited to get it on the Dyno. This will be done, Next Thursday. I will let you know.

He seems to feel over 50 based on his past experiance with this motor.

Smitty

 

hey smitty i will be picking my speed up thursday, let me know what time. I would love to see that pull on the Dyno. I had Josh do the pipe and remap. I am very happy with Trinity. I will suport them to the fulest. There is a few people that i would love to be a rider for and Trinity is one of them. Like Duffs shoes and Oakley. All three do great things for us and those are the people i would love to ride for, someone i bleave in. Sorry to go off but i would never race for any one i did not like even if they do help alot. I have raced every thing from bikes to gas scooters and am always good for at lest 3rd. sorry to go off i just realy like those guys!!!

 

I have to call him first but it should be in the afternoon on the 3rd.

Smitty

 

Smitty: I would make sure you take a 3.5" disk with you to get a copy of the dyno runs. I pick up my Blaze tomorrow, I will dyno it sometime this winter, should be interesting. Let us know the results when you get them.

 

See if you can get the dyno done with an RPM scale VS the MPH scale.