I have an Eiger 400 and am wondering if it will fit into a S-10 crew cab with the short box (with the tailgate down) that I am thinking of buying?

Any input would be appreciated..

 

Look at the quads in my sig. All fit (one at a time) in the back of my Ranger. Had to make a ramp to get over the wheel wells (see pics). The power wheels will fit in the cab. [img]i/expressions/face-icon-small-smile.gif[/img]

 

I had an s-10 and the front end of my 230 would fit between the wheel wells but not the back ones. I think that all 4wd quads are wider than the front of my 230 so I'd say you have to ramp it over the wells in some way.

 

I can fit a kodiak in a toyota tacoma!

 

as long as the width of the bed is 48in you should be ok.

 

My KFX700 V Force fits in my standard bed S10 like a glove with the tailgate shut.

 

just about any quad will fit in just about any pick up

 

Yup..shouldn't really have a problem...just have to get it over the wheel wells..you should be good..my scrammy fits in my ranger..its bigger than an s10 but you should be fine...

 

I can load my Kodiak 450 into my s10 , but I cannot close the tailgate. It has a bed liner and the front tires
squeeze through the fender wells.

 

The only cautions I would have about driving over the wheels wells would be 1- the obvious driving into the back window (almost went through mine, thus the ramp) and 2- I put grooves in the wheel wells from the rims. It didn't scratch the paint in the truck, but you may have a better looking truck than mine. As you can see from everyones posts, just about every make will fit. Kind of strange the Ranger will load with the tailgate shut and the S-10 won't. [img]i/expressions/face-icon-small-confused.gif[/img]