whats the difference between the endurance and the panoram trail tech

 

I BELIEVe that it is just the new upadted model. Someone correct me if Im wrong

 

Here ya go, this is what trail tech says is the difference.

What is the difference between the Panoram model and the Endurance model?

Our latest computer is Endurance. We no longer sell Panoram. Improvements/changes are:

Scratch and chemical resistant screen for the Endurance computer.
Different internal electrical contacts for the Endurance computer.
Faster processor for the Endurance computer (updates speed at 2X the rate)
Different programming for the Endurance computer to allow for Enduro riding (increment and decrement)
Impact resistant case for the Endurance computer.

 

thanks alot. [img]i/expressions/face-icon-small-smile.gif[/img]

 

Got mine installed this morning...wasn't real hard... pick a shady spot, you'll have to take the wheel off (atleast I did on my vforce) to get to the bottom screw that holds the sensor... all in all was a pretty easy deal. I really like the odometer and maintenance reminders they'll come in handy.....

 

I have one of each, and can testify that the endurance works much better. Kelly and Geoff are putting out some great looking/working products. Also very accurate, when checked with the GPS.

 

Vforcerider, thanks for the info. Where did you mount it on your v-force ? Is it on the handlebar at an angle ?
( I am lookin at the same speedo) Most of the ones I have seen are on a custom mount or a different cross bar.

 

I mounted mine to the bars right to the left of the stock console.. it partially covers one of the console lights but no biggie.. I like this trail tech alot... helps me keep an eye on my fuel usage.. seems like around 25 mpg, unless i've got the wrong number punched in ... I used 1755 as the number

 

I mounted mine along with the torch lights, 50watt, on the billet plate and love the entire setup. No trouble at all, just don't forget to watch where you're going when looking at your speed.

 

Vforcerider,

I see you used 1755 as your setting. I used 1676, which it listed as a 22 inch tire for the Honda. Did you measure your tire like they showed in the instructions ?