Performance Mods and Project Quads Share and ask for information about modifying your ATV or building project quads.

How to Make a Warrior Faster

Old Aug 10, 2003 | 11:23 AM
  #1  
MorpheousYFM's Avatar
Thread Starter
|
Trailblazer
Joined: Aug 2003
Posts: 35
Likes: 0
Default How to Make a Warrior Faster

What would be some thing i could put on my quad to make it faster and notice the diffrence. The speed mods I already have are...

FMF Megamax II Exhaust
Jet Kit 42.5 pilot/150 main
13 Tooth Front Sprocket
 
Reply
Old Aug 10, 2003 | 06:19 PM
  #2  
MorpheousYFM's Avatar
Thread Starter
|
Trailblazer
Joined: Aug 2003
Posts: 35
Likes: 0
Default How to Make a Warrior Faster

any 1 out there to help
 
Reply
Old Aug 10, 2003 | 06:38 PM
  #3  
twentycharacters's Avatar
Pro Rider
Joined: Jun 2003
Posts: 1,387
Likes: 0
Default How to Make a Warrior Faster

i dont know if 13T on the front sprocket is stock but go one tooth up; i did on the one i had and mine was totally stock. the warrior has enough to pull a tooth higher there and will give you more top speed.
 
Reply
Old Aug 10, 2003 | 06:49 PM
  #4  
MuddnYama's Avatar
Weekend Warrior
Joined: Jul 2003
Posts: 12
Likes: 0
Default How to Make a Warrior Faster

13 is stock on a warrior,
get a new cam and piston
 
Reply
Old Aug 15, 2003 | 11:39 AM
  #5  
MorpheousYFM's Avatar
Thread Starter
|
Trailblazer
Joined: Aug 2003
Posts: 35
Likes: 0
Default How to Make a Warrior Faster

K ill look into that but i will go a tooth up
 
Reply
Old Aug 15, 2003 | 03:22 PM
  #6  
DaSandBomb's Avatar
Pro Rider
Joined: Mar 2003
Posts: 955
Likes: 0
Default How to Make a Warrior Faster

a GSX-R 1100 street bike motor, you might fill a little differents[img]i/expressions/face-icon-small-tongue.gif[/img]

kc
 
Reply
Old Aug 16, 2003 | 03:53 PM
  #7  
shlekter's Avatar
Pro Rider
Joined: Jul 2003
Posts: 233
Likes: 0
Default How to Make a Warrior Faster

38mm carb will do the trick
 
Reply
Old Aug 18, 2004 | 12:57 PM
  #8  
2phast4u2catch's Avatar
Pro Rider
Joined: Jun 2004
Posts: 509
Likes: 0
Default How to Make a Warrior Faster

what i have deff did the trick
 
Reply
Old Aug 19, 2004 | 04:46 AM
  #9  
Grimmsniper's Avatar
Range Rover
Joined: Aug 2003
Posts: 125
Likes: 0
Default How to Make a Warrior Faster

Give four stroke tech a call. Mickey has all the motor mods you need and good advice.
 
Reply
Old Aug 19, 2004 | 07:19 AM
  #10  
NLWarrior01's Avatar
Pro Rider
Joined: Jul 2003
Posts: 1,859
Likes: 0
Default How to Make a Warrior Faster

Two things you don't need to touch on the Warrior until you start modding the engine are:

1. Carb - Warrior stock carbs flow lots of air for the 350CC 2 Valve engine

2. Header - Warrior stock header flows everything you can put through it up to about 435cc +

Improvements for more speed on the Warrior will often times make it "seem" slower because it takes longer to pull that speed (unless you're adding more power). In regards of average top speed, I found that going down one tooth to a 12T front actually increased my average top speed because the bike could speed up quicker. On trails where I could usually only hit around 90km/h with the 13/40 I was hitting 97-98km/h, and faster too using the 12/40.

Something to keep in mind I guess is that engine mods (cams, pistons, filter, etc) while the add more power they do not add more speed, unless you're unable to reach top RPM in stock form. Gearing and power mods will add speed for you. Grimmsniper said it best though .. call/contact Mickey Dunlap. If there's anyone that can make your Warrior fast, it's him!!

Now I'll sit back and monitor waiting for the " sell it and buy a 400EX / Z / etc " post [img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-shocked.gif[/img]


 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:00 PM.