Where is the best/cheapest place to get a PWK air stryker carb?
ERIC

 

get it from LRD 503-661-6700
they change it up a little so it performs better
plus they pre jet it for you

 

I believe Hy-Tech is the cheapest at $170. I bought mine for $220 with cable last spring from CT Racing. As for prejetting, it'll get you close, but it's never right. Each bike is just a little bit different.

 

I have Air Strykers on my modified Banshee (ported/polished/bored, coolhead w:18cc domes/Wiseco pistons, etc.).

I am still running with the stock reeds and cages.

Would I obtain much performance improvment with an aftermarket set of reeds and cages?

What is the best set for my engine and exactly what performance improvements would I experience? Would it really be worth the $$$?

 

what would be the best size air stryker to get for a 250r with no porting,fmf fatty pipe and a rad valve. i might possibly get mine ported in the future though for mx.

 

the 38mm AS is a great all around carb..if you are only going to do woods racing or things where you need the most low end grunt, a 35 AS bored to 36 or 37mm might be the hot setup. I'd go with the 38mm AS tho