Water mixed with fuel in cylinder
#1
10-20-1999 | 03:39 PM
Thread Starter
|
Extreme Pro Rider
Joined: Jul 1999
Posts: 2,858
Likes: 0
ATV'ers,
I recently had the cylinder on my 85 LT 250 R re-sleeved back to stock specs. While breaking it in, gently, The LT sudeenly dies. BAsically I had water get into the fuel mixture BEFORE it got into the cylinder. (It was puddled on the piston under the fuel ports) This in turn ruined my piston with about 4 hours on it. Would you suspect either bad base gasket placement/sealing or a faulty re-sleeving job? I am hoping for the gasket scenario. Any help would be appreciated.
RoostKing
I recently had the cylinder on my 85 LT 250 R re-sleeved back to stock specs. While breaking it in, gently, The LT sudeenly dies. BAsically I had water get into the fuel mixture BEFORE it got into the cylinder. (It was puddled on the piston under the fuel ports) This in turn ruined my piston with about 4 hours on it. Would you suspect either bad base gasket placement/sealing or a faulty re-sleeving job? I am hoping for the gasket scenario. Any help would be appreciated.
RoostKing
Thread
Thread Starter
Forum
Replies
Last Post
bpegram84
Kids Quads & Other ATV's - Ask an Expert!
0
07-22-2015 08:15 AM
TLC
Honda
7
07-11-2015 02:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)