I am going to drain the coolant out of my Banshee in order to do some work on it. I have never done this before and I am concerned about refilling the system. It doesnt look like there are any places for air to get trapped and then cause heating problems, but I was wondering if there is anything I need to watch out for and what tips you could give me. Thanks for the help!


Mark

 

*****BE CAREFULL******I thought the same thing. After rebuilding my bike, I filled my radiator, ran the bike for awhile and filled it again. Then I took it to Pismo and on the second or third ride, my water temp gauge started hiking up fast and the bike didn't even feel hot. Trusting the gauge, I shut it off and found that I did have alot of air in the system!