i have an 88 banshee and i live in the moutains in Pennsylvania, and i was wondering if anyone could help me with the jetting, here are my mods,
DG EXHAUST
PRO-LITE WISECO PISTONS
BORED TO 60 OVER
KN FILTER WITH DRILLED COVER, NO SNORKEL
BOYESEN DUAL STAGE PRO-SERIES REEDS
BOOST BOTTLE

MY CURRENT JETTING IS
240 MAIN
27.5 PILOT
NEEDLE IS ON THE 3RD SETTING


AND COULD ANYONE HELP ME WITH A REASON FOR THE 2ND CARB TO BE RUNNING TOO LEAN WHILE THE 1ST CARB IS FINE? LINES ARE NOT CLOGGED!

 

check and make sure your intake is on good,no leaks.... go up on your mains and work your way down.go 260 and see what it does. better to be rich than lean !!! jets dont cost that much,top ends do .