How to get a good seal-LRD 250R pipe
#1
#2
It is probably not the pipe itself but that in the removel of the old pipe the little gasket that goes inbetween the compression ring and the pipe on the exhaust flange of the motor disinigrated. Either you can buy a new one or you can try sealing it with copper gasket sealer. Remember to let it sit over night before you fire it up.
Good luck
JC-TRX250R
------------------
Good luck
JC-TRX250R
------------------
#3
Make sure you use the high heat orange color gasket maker or another high heat brand i had this problem on my quadzilla and after ridin i would have oil everywhere. Just put a thin bead around the pipe let if sit overnite and this should hold. Also check the gasket that sits inside the exhasst flance coming off the motor
Alex
Alex
Thread
Thread Starter
Forum
Replies
Last Post
Frisky2050
Buying an ATV
10
04-09-2020 11:19 AM
ATVC Correspondent
Technical and How-To Articles
0
07-02-2015 01:34 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)