446 almost done!!
Sep 1, 2008 | 12:13 PM
#1
Thread Starter
|
Pro Rider
Your friend needs to stop smoking whatever it is that is rotting his brain!
Your friend needs to stop smoking whatever it is that is rotting his brain!
Joined: Oct 1999
Posts: 3,143
Likes: 1
From: Saginaw, MN
446 almost done!!
Well, it's been a long, drawn out process, but I'm starting to get somewhere on my 446 big bore/stroker Wolverine. My new job 200 miles from home isn't helping, until my house sells, I'm basically working my 4 ten hour days, then driving back Thursday night to take care of the house/mow lawn/ see my dogs and kid, then head back Sunday after lunch to do it all over again. Not a lot of spare time !!
Anyway, motor is up and running, finally got the new Kodiak 8 pass oil cooler hooked up,just took a little top bracket reweld, and some custom brackets on the bottom to bolt it to the frame. My surprise was the first time I tried to start it, it turned over 3 times,and took right off! warmed it up good, putted around the yard,no seat, no front plastic, I must have looked pretty silly! Jetting is still off, too rich on the top, but the botto end feels pretty good, rejetted and tried again, a lot better, after a warm up, I ran it around the yard, any little bump I hit,a jab of the throttle would bring the front end up,never did that before. I have a CFM aluminum air box, but still have the stock exhaust, I need some recommendations on a good all around slip on, not too loud, this is a yard and trail machine, not a racer !! I am looking at a Muzzy, any one have experience with those? Well, my weekend is up, back to work, so I will try to finish up next weekend.
Anyway, motor is up and running, finally got the new Kodiak 8 pass oil cooler hooked up,just took a little top bracket reweld, and some custom brackets on the bottom to bolt it to the frame. My surprise was the first time I tried to start it, it turned over 3 times,and took right off! warmed it up good, putted around the yard,no seat, no front plastic, I must have looked pretty silly! Jetting is still off, too rich on the top, but the botto end feels pretty good, rejetted and tried again, a lot better, after a warm up, I ran it around the yard, any little bump I hit,a jab of the throttle would bring the front end up,never did that before. I have a CFM aluminum air box, but still have the stock exhaust, I need some recommendations on a good all around slip on, not too loud, this is a yard and trail machine, not a racer !! I am looking at a Muzzy, any one have experience with those? Well, my weekend is up, back to work, so I will try to finish up next weekend.
Sep 1, 2008 | 02:56 PM
#3
Thread Starter
|
Pro Rider
Your friend needs to stop smoking whatever it is that is rotting his brain!
Your friend needs to stop smoking whatever it is that is rotting his brain!
Joined: Oct 1999
Posts: 3,143
Likes: 1
From: Saginaw, MN
446 almost done!!
I'm particularly proud of how the oil cooler came out, I was able to use the stock oil lines and fittings, since it was all Yamaha parts, just tilted the new oil cooler back and used the 2 threaded mounts on the frame to attach the aluminum brackets,it seems to be working good, the old 3 pass would get scorching hot when warmed up, so far this was get hot, but not any where near the old one, and I don't seem to be getting as much heat off the motor,it seems to be keeping the temps in check a lot better. You're right, I should take some pictures and post them, I even made a quick and dirty lower grill out of some perforated aluminum, painted to match the bumper, looks ok until I can fab up something more permanent. Once the jetting is done,and I can find a pipe, it should be a nice little plaything, can't wait to take it back up by Duluth and ride some trails (if I ever sell my house and get moved up permanent !!)
