Intake systems?
Aug 24, 2010 | 08:01 AM
#2
Supersock
Hired Gun!
"Badges? We don't need no stinkin' badges!"
Hired Gun!
"Badges? We don't need no stinkin' badges!"
Joined: Apr 2003
Posts: 142,309
Likes: 182
From: Land of the misfit toys
There's really not much to the intake system. A filter and a short tube to the carb. Taking the lid off the air box is another step.
Lots of arguments on who makes the best filter. K&N and Uni are probably the top two.
Getting the carb jetted correctly is the main key, most times if you're just changing out the filter alone you should be fine. But if you get a pipe or full system with a hi flow air filter/lid cover than jetting is very important.
If it's an automatic like a Polaris, matching the clutch to the exhaust is another key.
Lots of arguments on who makes the best filter. K&N and Uni are probably the top two.
Getting the carb jetted correctly is the main key, most times if you're just changing out the filter alone you should be fine. But if you get a pipe or full system with a hi flow air filter/lid cover than jetting is very important.
If it's an automatic like a Polaris, matching the clutch to the exhaust is another key.
Thread
Thread Starter
Forum
Replies
Last Post
jrooker6
Polaris
18
Apr 23, 2016 07:36 PM
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
Oct 22, 2015 07:04 PM
ATVC Correspondent
Performance Mods and Project Quads
5
Oct 10, 2015 10:20 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)