I am sure that this question has been answered before but here goes.I just bought a pro design kill switch and I have no idea how to install it on my 01 raptor.I am sorry if this is a lame question but I am not to good with this sort of thing.Thanks in advance.[img]i/expressions/face-icon-small-happy.gif[/img]

 

Take 1 wire from the kill switch & splice it into the orange wire on the coil (It's under the left front fender) & ground the other wire to the frame.
It's that easy!!

 

Thanks man it worked like a charm.[img]i/expressions/face-icon-small-happy.gif[/img]

 

Instead of splicing, I wrapped my wire around the male end of the orange wire and plugged it back in.

 

I used connectors that were the same as the orange wire has that plugs into that little black box. I just hooked up the kill switch so it plugs into the orang wire then the kill swith plugs on the connector that the original orange wire pluged into then i hooked up a grund and it looks good and with doing this I can unplug the kill switch and plug back the orange wire like nothing was ever added.