Performance Mods and Project Quads Share and ask for information about modifying your ATV or building project quads.

Banshee with oil coming from breather tube?!

Thread Tools
 
Search this Thread
 
Old Apr 1, 2000 | 08:12 AM
  #1  
Bad_Banshee's Avatar
Thread Starter
|
Weekend Warrior
Joined: Dec 1999
Posts: 15
Likes: 0
Default

Here's the deal. Oil from the clutch/transmission is dripping from one of the breather tubes that comes out by the steering stem. I'm I losing a seal somewhere? I have a Chiltons on the Banshee, but nothing in there really helps. Thanks...
BobbyLee
 
Reply
Old Apr 1, 2000 | 10:08 PM
  #2  
travsbanshee's Avatar
Trailblazer
Joined: Mar 2000
Posts: 69
Likes: 0
Default

are you sure it isn't leaking from the seal behind your front sprocket, and then running towards the front on your case? that was the problem with mine.
 
Reply
Old Apr 2, 2000 | 12:11 AM
  #3  
Mike300EX-99's Avatar
Range Rover
Joined: Feb 2000
Posts: 155
Likes: 0
Default

Did you over fill it on your last change??
 
Reply
Old Apr 2, 2000 | 08:00 PM
  #4  
blobby's Avatar
Trailblazer
Joined: Apr 2000
Posts: 31
Likes: 0
Default

Crank case pressure leaking into gear box, Bad seal on cases.Hence forcing oil up breather. Have had it happen my self.. Strip motor down and re. silicon... Check mateing faces for damage..
 
Reply
Old Apr 4, 2000 | 01:18 AM
  #5  
350Banshee's Avatar
Weekend Warrior
Joined: Jul 1999
Posts: 9
Likes: 0
Default

It does sound like cranckcase pressure is entering your gearbox. The only way this can happen is if you have a right side crank seal that is worn.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cole Hadden
Polaris
25
Jun 15, 2025 09:05 AM
Captjay
Polaris
8
Jul 23, 2015 12:33 PM
Dirtbikemike1
General Chat
1
Jul 11, 2015 03:36 PM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
Jul 7, 2015 11:00 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 02:52 AM.