ATVConnection.com ATV Enthusiast Community

Polaris Ask an Expert! In fond memory of Old Polaris Tech. An area where experts in their field will answer non-general questions about your Polaris ATV.
"old polaris tech" and other experts will answer your questions as they have time.
ASK ALL GENERAL QUESTIONS OR BASIC QUESTIONS IN THE POLARIS FORUM.
Basic or General questions posted in a expert section will be moved!

2007 polaris sportsman 800 wont start

   
Old Mar 2, 2017 | 03:13 PM
  #21  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default
Originally Posted by Polarisxrider
I took the front end to my dealer he said the cage roller are rough and so if the part they ride on I think it's the hub is pretty sought he said it other then that it looks good I'm just trying to find the best deal he said through polaris it's bout 400
DON'T let him install a plastic roll cage as it's a waste of money and will crack. Supply your own if he's too high on the Polaris aluminum cage. 129 bucks after market on amazon and ebay.
 
Attached Thumbnails 2007 polaris sportsman 800 wont start-616z-6qknol._ac_ul320_sr240-320_.jpg  
Reply
0
Old Mar 2, 2017 | 03:16 PM
  #22  
Polarisxrider's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2017
Posts: 24
Likes: 0
Default
How much is the part that the rollers roll on
 
Reply
0
Old Mar 2, 2017 | 03:36 PM
  #23  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default
129 bucks on ebay or amazon.http://www.ebay.com/itm/2005-06-Pola...9U5kZc&vxp=mtr
Amazon Amazon
 
Reply
0
Old Mar 2, 2017 | 03:39 PM
  #24  
Polarisxrider's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2017
Posts: 24
Likes: 0
Default
Not the cage the ones part I think it the hub
 
Reply
0
Old Mar 2, 2017 | 03:48 PM
  #25  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default
Originally Posted by Polarisxrider
Not the cage the ones part I think it the hub
Output hubs are dealer only that I've found.Pretty expensive if needed. Items #2 and 5 on the parts break down,but cheaper than an $1100 diff.
Polaris ATV Parts 2007 A07MH76AL-AQ-AX-AY-AZ-A2-MN76AF-AT-AY SPORTSMAN 800 EFI GEARCASE, FRONT (ACTIVE DESCENT CONTROL)(If Built After 7-17-06) Diagram
 
Reply
0
Old Mar 2, 2017 | 04:43 PM
  #26  
Polarisxrider's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2017
Posts: 24
Likes: 0
Default

He said this the roller cage and roller were bout 400 hundres dollars
 
Reply
0
Old Mar 2, 2017 | 04:51 PM
  #27  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default
If he included the "optional" aluminum roller cage along with the output shaft that's a pretty good deal,but I highly doubt it as the cheapest I've seen for oem aluminum cage is close to 300 bucks itself.
 
Reply
0
Old Mar 2, 2017 | 04:55 PM
  #28  
Polarisxrider's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2017
Posts: 24
Likes: 0
Default
Yes but it's plastic cage I'm gonna by an aluminum cage and have him order the rest and my coil plate reads 23 something ohms
 
Reply
0
Old Mar 2, 2017 | 05:04 PM
  #29  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default
Originally Posted by Polarisxrider
Yes but it's plastic cage I'm gonna by an aluminum cage and have him order the rest and my coil plate reads 23 something ohms
That's the way to go,plus the coil sounds like it's ok also.
 
Reply
0
Old Mar 2, 2017 | 05:28 PM
  #30  
Polarisxrider's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2017
Posts: 24
Likes: 0
Default
I just hope this works
 
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 09:23 AM.