do you have to weld rcr midrange pipe on tb?

Reply Subscribe

Thread Tools

Search this Thread

Jun 14, 2003 | 08:13 PM

Lightman02

Thread Starter

Pro Rider

Joined: Jan 2002

Posts: 443

Likes: 0

do you have to weld rcr midrange pipe on tb?

do you have to weld rcr midrange pipe on tb, because i order one, or does it go rite on the stock header? HELP?!

Jun 14, 2003 | 08:57 PM

trailblazerRIDER

Trailblazer

Joined: Oct 2001

Posts: 29

Likes: 0

do you have to weld rcr midrange pipe on tb?

No you do not have to weld it. It goes right on to your stock head pipe with the stock exhaust springs. Make sure you dont loose the exhaust springs like i did.
~RYNO~

Jun 14, 2003 | 09:01 PM

Lukester

Pro Rider

Joined: Apr 2003

Posts: 563

Likes: 0

do you have to weld rcr midrange pipe on tb?

If it is the White Brothers E Series Slip on then no weld, it will probably be a slip on (hose clamp) pipe. Be sure to add heat reflector tape as to not burn your plastic. Tripple layer it. I'm sure it's a good pipe and it will all be OK. RCR is a good co..