Well i made my own..i know of a couple companys that make em, seen em on Ebay..seem to work good so i figured i'd make my own! took a peice of solid alum and made it on the ladith..( i can work one better then i can spell one! Anyways heres a picture or two! let me know what you think!



Picture #1

Picture #2

Picture #3

And just for the hell of it i'll throw in one of my air scoops! [img]i/expressions/face-icon-small-wink.gif[/img] I cut the flames off them, thought they'd be too shape.(the old picture is in my profile)

Picture #4

Hopefully these will work! LOL

 

Nice!

 

have you tried "engine ice" lowers the temp. i think redline also makes one.

 

Nifty. [img]i/expressions/face-icon-small-happy.gif[/img]

 

Yeah i used Redline water wetter..but since i had the rad out i figured id just put reg coolent mix in..plus winter is just around the corner..have to switch it then anyways! LOL

thanks Ken!

Again, i dont know how well it'll work..i mean i could only get the fins so small and such..but hey..it cant hurt! [img]i/expressions/face-icon-small-wink.gif[/img]

 

Very Nice, Scotts88. Are you a supplier now? [img]i/expressions/face-icon-small-smile.gif[/img] Anyone have a "report" on using these? I bet they'd work well for me out in AZ desert....still expectin' 105 Degrees this weekend - and its the end of Sept!

 

Nah..Prob only a one time thing..I just used some scrap alum pipe that we had laying around..cant see going in and buying some to make..plus they take up time.

I have NO idea if it works or not..i cant see why it couldnt..alum just sucks the heat outta anything..now the ones on the web..they say they have the perfect amount of fins, the right size..blah blah blah..mine looks about the same..should work just as good..ie..its not flow tested! [img]i/expressions/face-icon-small-wink.gif[/img]

 

UGGGG.

your head pipe looks as bad as mine.............looks like barfed up chocolate cookies........

WHY can't polaris get a better bake on hi-temp paint......or *GASP* spend the few extra dollars and jet-hot coat them from the factory.......

This winter mine is getting sent out for the Silver Jet hot......Guys, this stuff is AWESOME, and should only cost $60-70 for the head pipe to look shiney silver for life!

 

Oh yeah..looks like CRAP! I have no idea what kind of paint they use on it...i mean come on..this is a high performance quad..it deserves high performance paint! [img]i/expressions/face-icon-small-wink.gif[/img]

 

G'day guys,

For your pipe give it a good scrub then spray wd40 all over and any other time you can.
In time it gives it a dark oilly look, though not as good as your ceramic coating will look Dave.

Geoff.