Anybody out there? I need help!
I finally got all the parts for my hpd trail mod kit for my scrammy. I stripped the machine down for the engine swap, and I thought I was being careful paying attention to where everything was. It turns out I wasn't as careful as I thought. When I pulled the piston, I didn't look at the piston position. This is my first engine swap, so any help or tips would be great. Anyway back to my question. I'm installing a wisco piston with the mod kit, which way should the arrow on the piston point in the cylinder, towards the exhaust or the intake side? I am assuming that the holes in the piston skirt should face the intake, but this is only a guess. Please HELP!!!!

 

If it was a guess, it was a good one. Arrow to exhaust, holes to intake.
Your on a roll, now you need to go to Vegas. [img]i/expressions/face-icon-small-happy.gif[/img]

 

the intake windows go on the intake side, if it is wiseco there is a arrow that points toward the exhaust that was one on my piston

 

Thanks for the help guy's[img]i/expressions/face-icon-small-smile.gif[/img]
I thought I had it right but I wanted to make sure.