Just wondering if the rear hubs from a 2003 model 330 magnum straight axle will fit a 2000 model 325 magnum. My 2000 model has 10inch wheels and my cousins 2003 330 magnum has 12 wheels standard. So I was thinking if they would fit I could get some of them, then use most any polaris 12inch wheels. I so want to get a set of 12 inch mud tires all the way around.

 

You don't need to change hubs to use 12" wheel's. You both should have the same bolt pattern. As far as useing other Polaris 12" wheel, I could be wrong, but I believe your bolt pattern is 4/4 while most utility Polaris are 4/156. So your use of of wheels will be limited. Another option is putting Predator hubs on your Magnum with the 4/156 or 4/110 pattern and you will have unlimited access to wheels. I believe Polaris uses Team axles on all there solid axle atv's so all there hubs will fit each other.

 

His 2003 magnum has the same bolt pattern as the front wheels while mine are different in the rear. I noticed this on IRS before but never really looked at his real close before yesterday.

 

OK then Polaris did change, so yes they should fit. But before you buy them, take your buddies off to see if they do fit.

 

Thats what I was gonna do before I got them but getting together sometimes does not always work out. I will get it done and update everyone because I know there are others that would like to change also. I just figured I would take a chance on someone that may have already tried it, or maybe a polaris mechanic could speak from experience. Thanks for helping out.