Hi guys new to the forums! I'm installing a Warn 2.5 winch on my sp800 and ran into a problem. When you run the wires down from the rocker switch, which orange/white wire do you connect to the red wire to? I'm confused because their are two different orange/white wires, one with plastic connector and the other has two orange/white wires that go side by side into one connector, all are not hooked up to anything. Thanks for the help!

 

Both are ignition hot wires. Use the one with which connector you want to put on that will slide into the connector. Either male or female.

 

hey thanks for the quick reply elkbow, I will jump right on it![img]i/expressions/face-icon-small-happy.gif[/img]

 

No problem JJ....welcome to the forums, come back and enjoy the fine reading....alot of good people here with alot of knowledge....almost anything can be answered here....I know everyone has been a great help to me....

dave

 

if you go to the following link, you will see the two hot wires, one I'm running the winch off of the other is my heated grips...:

ignition wires

dave

 

A plow? In New Mexico?

<scratches head>

You live near mountains or something? I thought it was all desert out there? [img]i/expressions/face-icon-small-smile.gif[/img]

 

Desert? Yes, High Desert....my house is at 5700 feet in elevation. I got 10" of snow last week, which is unusual for the city, on the back side of the Sandia Mountains which line Albuquerque, they got 24" of snow last week....basically in one day.

 

I remember the days when we used to get snow around here...(VA)

All we get now is mixed crap which usually ends up being ice.

Enjoy the snow in New Mexico!