Trailblazer head machining?
#2
Trailblazer head machining?
you usually get help from ritter he'll tell you what you need to know because if you go to far you'll end up raising the compression too high and you'll have to use race fuel if theres too high of a compression rittercycle.com
#4
Trailblazer head machining?
Originally posted by: drlang
You do know that, .0675 is a 1/16 of an inch.
I went .020 head goes on this week, I'll write back.
For professional advise, call RCR
You do know that, .0675 is a 1/16 of an inch.
I went .020 head goes on this week, I'll write back.
For professional advise, call RCR
Well from being a automotive mechanic for 4 years and spending a year working in a speed shop i know that when you mill your heads the compression does rise. And on a 2 stroke it brings the squish clearances closer. So he would be better off talking to the professionals at ritter cycle.
#5
Trailblazer head machining?
I was told 45 to 60 thousands by a guy that pretty much specializes in trailblazer performance. He wasnt really sure though. I have a pipe, clutch kit, ported, and just about have a predator carb on it just have to hook up the throttle cable. I'll probably ask ritter. Thanks.
#6
Trailblazer head machining?
Originally posted by: tblazer
I was told 45 to 60 thousands by a guy that pretty much specializes in trailblazer performance. He wasnt really sure though. I have a pipe, clutch kit, ported, and just about have a predator carb on it just have to hook up the throttle cable. I'll probably ask ritter. Thanks.
I was told 45 to 60 thousands by a guy that pretty much specializes in trailblazer performance. He wasnt really sure though. I have a pipe, clutch kit, ported, and just about have a predator carb on it just have to hook up the throttle cable. I'll probably ask ritter. Thanks.
#7
Trending Topics
#8
#9