Polaris Discussions about Polaris ATVs.

99 scrambler pulls to right???

Thread Tools
 
Search this Thread
 
  #1  
Old 09-10-2005 | 02:05 PM
marksduramax's Avatar
Thread Starter
|
Range Rover
Joined: Feb 2005
Posts: 110
Likes: 0
Default 99 scrambler pulls to right???

when i have it in 4 wheel drive it wants to pull to the right some but dose it bad when you take it out of 4 wheel drive what could it be?
 
  #2  
Old 09-10-2005 | 06:07 PM
cornbread2's Avatar
Pro Rider
Joined: Aug 2005
Posts: 466
Likes: 0
Default 99 scrambler pulls to right???

Two things can cause this. One locking hub is staying in or one rear tire is taller than the other.
 
  #3  
Old 09-10-2005 | 07:00 PM
XtremeSkier's Avatar
Elite Pro Rider
Joined: Nov 2004
Posts: 12,763
Likes: 0
From: Minnesota
Default 99 scrambler pulls to right???

mine does that to, i generally just take it out of 4 wheel drive and wait for it to stop, then try it again
 
  #4  
Old 09-11-2005 | 12:15 AM
jimk72's Avatar
Pro Rider
Joined: Apr 2004
Posts: 464
Likes: 0
Default 99 scrambler pulls to right???

Drain both front hubs and then refill with polaris hub fluid. Don't fill them all the way up, turn the tire so the hole is at like 2 o'clock and then fill it till it gets to the hole. This usualy fixes it. I usualy change my hub fluid every summer.
 
  #5  
Old 09-11-2005 | 12:23 AM
marksduramax's Avatar
Thread Starter
|
Range Rover
Joined: Feb 2005
Posts: 110
Likes: 0
Default 99 scrambler pulls to right???

Originally posted by: jimk72
Drain both front hubs and then refill with polaris hub fluid. Don't fill them all the way up, turn the tire so the hole is at like 2 o'clock and then fill it till it gets to the hole. This usualy fixes it. I usualy change my hub fluid every summer.
whats a trick to get a striped head out the allen head it striped out on the left side
 
  #6  
Old 09-11-2005 | 12:37 AM
jimk72's Avatar
Pro Rider
Joined: Apr 2004
Posts: 464
Likes: 0
Default 99 scrambler pulls to right???

Remove the end cap and make sure there is nothing right there that will get hit and drill it out. Find out what size the hex screw is and redrill and tap it. I seems like a pain but it is really easy. You just need the right size bit and tap and a new screw. Once you get that should only take a few minutes.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mitchxc700
Classifieds, Garage Sale & Swap Shop
0
08-10-2015 09:26 PM
1000gade
ATV Videos
4
08-09-2015 03:34 PM
raceware
Polaris
1
07-30-2015 06:59 AM
DeFox500
Other ATV Topics
6
07-26-2015 06:32 PM
maxjung
General Chat
1
07-13-2015 05:11 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 99 scrambler pulls to right???



All times are GMT -5. The time now is 11:33 AM.