Wheelies
#21
i've found an easy way to do wheelies on my 400 scrambler. sit on the quad with your right knee towards the back of the seat. stop dead or give it a rolling start and just punch the gas a little bit and pull up. you barely even have to pull up with this way. remember, right knee on the back of the seat and give her gas.
#23
You Polaris guys are a bunch of ****s. I've never heard of so many stupid methods of pulling a wheeile in my life. Regular folk use three methods:
1. Slip or pop the clutch.
2. Hold the auto clutch shifter in between two gears and let it up quickly. Similar to popping a manual clutch.
3. Simply do a manual. BMX guys know what I'm talking about. Polaris ****s don't need to worry about it since their quads are so heavy there is no way to do a manual unless you are 350lbs or better.
1. Slip or pop the clutch.
2. Hold the auto clutch shifter in between two gears and let it up quickly. Similar to popping a manual clutch.
3. Simply do a manual. BMX guys know what I'm talking about. Polaris ****s don't need to worry about it since their quads are so heavy there is no way to do a manual unless you are 350lbs or better.
#24
When jviper 85 and I where racing I would pull a wheelie right before and while I was passing him.And this was on a stock 300ex!!!!!LOL.
I can understand why that thing don't run storng though.
1.It can't breath.It has the snorkel filter plus the air filter plus the small snorkel it self.
2.Low compression.LIke 6.1 compression ratio.Shave the head ad a higher compresion piston and there your go.
3.No expansion chamber.That's why they respond so good to a aftermarket pipe.
4.weight.My 250r weights like 350 his t blazer weights 440?.Some aluminum wheels,lighter pipe,lighter swing arm.That helps alot.
5.The tranny is not agressive enough.engages to high or not high enough.
6.Wrong rider. Just kidding!!!!!
These are just my thoughts please do not be offended in any way by them.IF your sorry.
I can understand why that thing don't run storng though.
1.It can't breath.It has the snorkel filter plus the air filter plus the small snorkel it self.
2.Low compression.LIke 6.1 compression ratio.Shave the head ad a higher compresion piston and there your go.
3.No expansion chamber.That's why they respond so good to a aftermarket pipe.
4.weight.My 250r weights like 350 his t blazer weights 440?.Some aluminum wheels,lighter pipe,lighter swing arm.That helps alot.
5.The tranny is not agressive enough.engages to high or not high enough.
6.Wrong rider. Just kidding!!!!!
These are just my thoughts please do not be offended in any way by them.IF your sorry.
#25
at least we can read,,this was a polaris forum,,go back to the hipo quad forum,, you must be 12 or so,judging by your response,,i must not be much older since im wasting my time with you,,oh well , schlitz 7 11pm, wheelies are easy on an auto,,brake,,throttle,pull,, try that on a manual!!!!lol!@!!
vulgarity and/or profanity, insults not permitted on tne forum.
To maintain your posting priveleges, kindly adhere to forum guide lines.
ATVBBS
vulgarity and/or profanity, insults not permitted on tne forum.
To maintain your posting priveleges, kindly adhere to forum guide lines.
ATVBBS


