Hey everyone, I lost the key to my scrammy a little while ago, it was the same time i was having spark problems. I was working on it for some time and managed to loose the key. I unplugged the brown wire and then it had spark so I could work on it more. I bought a aftermarket cdi and that solved my problems, I then went and was trying to figure out where the brown wire goes. I cant figure it out, I have tried about everywhere and i still have spark. My killswitch doesnt work and hasnt since i got it. Could someone help me out and tell me or show a pic of where that brown wire goes. I also have a part where there is wires that go to the board. It is the section on the bottom left, if you go all the way to the left on the board and go straight down, then go over one all i have is one green wire going there, the board sorta says there should be 2 "grn" wires but I only have one and dont see another grn wire anywhere else. I also need help on what else goes there or if anything at all. My email is bjrjr16@hotmail.com if you want to email pics or whatever else. Thanks alot, Brian

 

have any of you had problems with a ricks hotshot series cdi box?? This is what I have put on, Brian

 

ANYONE????